CINEMOOD TV Follow
By leveraging our 5-year experience in product development in the mini projector industry, we are launching the third generation of products in the fall of 2020, our new pride and joy - CINEMOOD TV. This is a brand new product with a new hardware base with a Qualcomm processor. CINEMOOD TV is the world's first mini projector with an LTE SIM card, designed for family viewing and education.
Additional information and pre-order are available here.
What makes it best in CINEMOOD family?
- The new CINEMOOD TV is 5x brighter (200 lumens vs 35 lumens)
- 2x higher resolution (848x480)
- 2x bigger picture: 120in on-ceiling view mode
- 3.3in x 3.3in x 3.3in (.3in wider)
- 0.8lbs (3.5 oz more, the weight is specified)
- 2x louder (4W vs 2.5 W), the sound has more bass and astonishing surround sound
- Active cooling with smart fan noise control
- LTE SIM card - now you will stay connected all the time
- Wifi IEEE 802.11 a/b/g/n
- Voice assistant - CINEMOOD TV will listen to your commands, find your favorite movies, call a taxi, or start a timer (we are workingo on integrating an Alexa or Google Assistant)
- Video calls - call your child directly to the CINEMOOD when it is online through Zoom
- 360°content - 360 videos and games
- CINEMOOD TV: quick launch mode of the CINEMOOD with the display of pre-installed and online content and the ability to move to the next movie by switching the channels with AI-powered recommendation system
Specifications
GENERAL |
Model name |
С3 |
Size |
85*85*85 mm |
|
DLP MODULE |
Brightness |
200 lm |
Resolution |
854*480 |
|
MEMORY |
RAM |
LPDDR3 1Gb MB/32 Bit |
Storage |
EMMC 8Gb+external SD Card |
|
External SD Card support |
up to 256Gb |
|
AUDIO |
Speaker |
4W |
SENSORS |
VR support |
Yes Gyroscope, Accelerometer, magnetometer |
CONNECTIVITY |
Wi-Fi |
2.4 GHz / 5 GHz |
LTE |
yes |
|
BATTERY |
Capacity |
5200mA-h (up to 3.5 hours, with LTE-WiFi on 2.5 hours) |
COOLING SYSTEM |
Heatsink |
Active Cooling |
FAN |
Can I charge the CINEMOOD while using it?
Absolutely, unlike the previous generation of CINEMOOD, you can charge CINEMOOD TV while using it, with a power bank for example.
CINEMOOD TV charge level
Unlike the previous generation of CINEMOOD, which has fixed brightness settings, CINEMOOD TV has different modes that affect the rate of battery discharge.
For example, it will run up to 3.5 hours with local (preloaded) content at the lowest brightness setting (which is still roughly on par with the previous generation) and will drain faster at higher settings with streaming services like Netflix and YouTube (about 2.5 hours at maximum brightness).
For more efficient charge usage, please follow these tips:
- To use charge more efficently, please use pre-loaded content (you can upload your own files to your CINEMOOD from a flash drive or laptop);
- Use auto-brightness settings at the Energy Saving section in your Settings;
- Watching video in high resolution will drain the battery faster (1080p and more), the optimal resolution for CINEMOOD TV is 720p. The resolution of the optical module is 854x480;
- Also unlike the previous gen, it allows you to charge your CINEMOOD while using it without any limitations, from a power bank for example.
General recommendations:
- You can use any adapters (without reference to the brand) with a voltage of 5W / 2.4A. The 5W adapter can be used to charge the device when it is off, the charging time will double.
- If you want faster-charging use an adapter of 10W
- If you want to charge while watching we recommend an adapter 12W
How can I change the brightness?
There is not possible to make the projection brighter by using the settings of the CINEMOOD device (for the previous generation). The brightness will depend on the brightness of the lighting of the room or from the lighting outside.
CINEMOOD TV has several brightness settings, including automatic mode, which adjusts brightness depending on charge level. To change brightness settings, please go to Settings - Energy Saving.
LTE support for CINEMOOD TV
One of the new features of CINEMOOD TV LTE-sim card support.
The card slot is located on the back of the device and opens up like most modern smartphones. After installing the SIM card, to activate the LTE mode, you need to turn off wi-fi and go to LTE - SETTINGS / NETWORK INTERNET and turn on Cellular Data.
Section "SIM Info" displays the status of data transfer.
Comments
0 comments
Please sign in to leave a comment.